From: Roger Corrie [rcorrie@cox.net]
Hi everyone
I have move the dates for the race to November as my real job is getting in
the way and I have to go to Charleston SC in late October. New dates below.
This years Concourse d' elegance will be called the Tom O'Riley Concourse
d' elegance. Anyone know who sells Tops Bodies?
Still pondering the race prize and I am open to ideas. I am leaning toward
either a 71 pony or a LWB 65/66 Fastback. If you know of any nice diecast
that I could shrink let me know.
The fifth annual Mustang Madness race will be held November 8th - 15th. All
cars must arrive by Saturday the 7th. Race will be on GreenRun Speedway.
First day of qualifying will start Monday the 2nd and run to Saturday the 7th.
This is a mail-in race. Entrance fee is $15.00 per team. This years Mustang will be ??? Still deciding...
Mail entries to
Roger Corrie
1450 Old Oak Arch
Virginia Beach, VA 23453
Each Racer may enter 2 cars Only the Top 24 qualifiers will make the cut All
DNQ's will be in the consi race. All cars will qualify as they arrive. Early
qualifiers if Bumped will have one chance to requalify. Onsite Tech Shop
will attempt to improve the car that is bumped as time allows. Cars arriving the
last day of qualifying will only have one shot at qualifying. Qualifying
will run over 6 Days Monday through Saturday. Race will begin On Sunday and Run
through the following week. All cars in race will run 4 timed heats. Cons
race will be two timed heats. Winners will be the car with the most laps and
sections. A concourse de elagane contest will be held
- Must be a stock Aurora TJET Chassis.
- Gear plate can not be modified except the rails may be removed to mount a lowered body, i.e. Nurora's Mustang has to have the rails removed.
- Armature must be STOCK 16 ohms or above, All gearing must be stock 9T pinion no 12 or 14s.
- Any readily available Motor Brushes ie Thunder Brushes, Wizard, JL, iFaller, HO World, Galinco. If I did not list the ones you want email me
- **** Note new Tire Rule Change this year *********************
- Tires may be stock Aurora, Model Motoring, JL skinny fronts or RocketScience's - RST T-Jet Ribbed Standard Thins.
- Pickups must be stock no American line.
- Wheels must be Aurora, Model Motoring. HO-Repro, RRR Mach I (Old Nurora),Vibrator, Elden and Atlas or MEV TJET wheels no Tuff-one wheel allowed orVincent. Minimum Tire diameter allowed is .360
- Tires and wheels must be under the body, you may use plastic spacers tobring the front wheels out as long as they are not visible when looking from thetop of the body down. Max width for chassis will be 1 "
- Motor Magnets must be stock TJET no AFX JL AW etc
- Axles must be stock skinny TJET either Aurora or Model Motoring no drillrods or cut down axels.
- Stock Guide Pin. No rear Guide Pin. Race will be on Aurora Model MotoringPin and Clip Track so Long guide pins will not work
- Bodies Allowed are any Aurora, JL, Nurora, MEV or RRR Mustangs. All musthave Front and Rear Glass. Corrie Motors 85 Mustang and 65 Mustang , Mustang II,68 Shelby or 71, Slot Bubbas 65 and also Claus Mustang. Other Bodies will beconsidered on a case by case basis All must have glass front and rear andfit through an 1 1/8th techblock.
- Any body mounting screws as long as it is two.
- If you have a Mustang not on the list you are modeling email for bodyapproval.
- Last years winner was a custom Mustang Wagon. Bodies may be lightened from
- the inside, Fastback Mustangs may have the interior removed. Wheel Wells must
- remain uncut.
